Coilover Suspension Street – MTSGWVW112

Description

MTS Technik Coilover Suspension – the perfect choice for drivers who appreciate the flexibility and the ability to adjust the suspension altitudes depending on your preference and road conditions. Stiffening of the suspension makes the car better to drive, more predictable and more secure.

Optimum alignment of the MTS Technik coilover suspension components causes recognition of the growing number of users. Large rims in the summer, smaller in the winter – thanks to MTS Technik coilover kits You can adjust the ride height to Your needs.

Additional Attributes:

GTIN: 05903855622265
Camber / top mount FA: yes
Camber / top mount RA: no
Coilover Helper Spring (Front): Spring rate (20 N/mm)
Coilover Helper Spring (Rear): Spring rate (20 N/mm)
Coilover Main Spring (Front): Spring rate (60 N/mm)
Coilover Main Spring (Rear): Spring rate (40 N/mm)
Housing: Gold
Product notes: 2 – Front and rear axle height adjustable (threaded shock absorber housing)., 8 – Not for 4×4., 9 – Only for vehicles without NIVO / OEM pneumatic suspension., 21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers., 29 – The installation requires the use of OE front struts – they should be cut and welded as described in the attached manual., 73 – For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
Prop 65: N
Series: Street

Extended Information:

Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: ST
Dimension: 25 x 18 x 9 inches
Weight: 22 PG